Maliy pr. V. O., 62/2, liter A, St. Petersburg, Russian Federation, 199178

Jaw crusher JC 6M

INDUSTRIES

 Mining

 Metallurgical

 Construction

 Chemical

Pharmaceutical

 APPLICATIONS

Ferroalloys, ores, slags, granite, marble, limestone, coal, coke, glass, ceramics.

    
    

 

CHARACTERISTICS

PARAMETERS

VALUES

Loading door dimensions, mm

60х100

Maximum initial material grain size, mm

50

Mohs hardness of crushed material, up to

8

Discharge slot adjustment range, mm

2-25

Average product particle size at minimum gap, mm

90%<2

Maximum output, kg/hour

200

Electric motor power, kW

1,1

50 Hz supply voltage, V

380

Collecting container volume, L

2

Overall dimensions, mm (Length x Width x Height with stand), mm

645х340х610

Weight with stand, kg

165

Jaw material – iron / steel

GJN-HV600 (XCr14) / UNS J91109/ WC

Compartible control panel

MPU3-02

* Depends on the hardness of the material and the discharge slot setting.

** When using jaws made of tungsten carbide.

ADVANTAGES

CRUSHING EFFICIENCY

The «tooth- trough» jaws combination provides high crushing performance.

EASY MAINTENANCE

Quick-release attachment lug jf the axle for easy maintenance. Lubrication of moving parts through grease fittings. Easy adjustment of V-belt drive.

EASY LOADING

Latch lockable cover reduces dusting. Loading hopper configuration eliminates material ejection. An opening for connecting a dust extraction system is made in the rear of the hopper.

OPERATIONAL SAFETY

The end switch excludes start-up without a loading hopper. Emergency Stop Button for quick shutdown. All rotating parts and assemblies are covered by casings.

CONVENIENT ADJUSTMENT

Sawtooth threads (instead of metric) reduce the danger of jamming of the adjusting unit. A thread pitch of 3 mm allows to quickly change the gap between the jaws. The lock nut provides a reliable fixation of the gap.

COLLECTING CONTAINER

Possibility of completing with a feed-through funnel, a collecting bin of 10 liters and a support stand.

EASY CLEANING

The loading hopper is fixed on the housing with the latches. The casing has windows in the front and rear walls for cleaning the crusher. During operation, the windows are closed with hinged covers.

QUALITY SPARE PARTS

JC 6M jaw crusher can be equipped with tungsten carbide jaws, which significantly increases jaws resource and allows crushing harder materials.

COMPATIBILITY WITH ROTARY SAMPLE DIVIDER

Simultaneous crushing and reduction due to the combination of JC 6M Jaw Crusher and RSD Rotary sample divider in a single technological complex. Aggregation eliminates the stage of sample overload, which reduces dusting and increases work productivity.

SET OF TRAYS

Rotary sample divider is equipped with trays of different sizes:

  • 25% of the sample;
  • 10% of the sample;
  • 5% of the sample;
  • a tray with a partition that provides smooth adjustment of the degree of reduction from 10% to 1% of the total sample volume.

DESCRIPTION OF THE DEVICE

JC 6M is a jaw crusher with a complex movement of the jaw, the destruction of the material in which occurs due to compression and shear deformations. The size of the crushed material is determined by the gap between the jaws in the lower part (discharge slot) and the physical characteristics of the crushed material.

The structure of the crusher includes: the loading hopper, the housing with the base mounted in, the connecting rod and the slot adjustment device. In the lower part of the housing there is a receiving container, in the back — the electric motor with a belt tensioner.

Two jaws are located inside the housing: fixed one on the base and movable one on the connecting rod.

The base is suspended on the axis, and its position in the lower part is determined by the adjusting device. The screw of the adjusting device rests against the base through the unit with Belleville springs, which protect the crusher from breaking if an invincible body enters.

The adjustment unit is equipped with a scale for setting the exact gap between the laws.

The base is suspended on the axis, and its position in the lower part is determined by the adjusting device. The screw of the adjusting device rests against the base through the unit with Belleville springs, which protect the crusher from breaking if an invincible body enters. In the adjusting unit, a sawtooth thread of increased diameter S 36x3 is used, which reduces the danger of jamming of the device.

Torque from the electric motor is transmitted through a belt drive to an eccentric shaft, on which a connecting rod with a movable jaw is mounted.

The casing has windows in the front and rear walls for cleaning the inner surfaces of the crusher, as well as the connecting rod, base and lever. During operation, the windows are closed with hinged covers.

The loading hopper has a configuration that eliminates material ejection from the crushing chamber. The hopper loading opening is closed by the lid. The hopper is mounted on the housing through a rotary axis and is fixed by two latches. The hopper is equipped with two gas lifts.

There are two nozzles with shutters for connecting the dust collector in the rear of the loading hopper and in the lower part of the housing. The shutters provide the adjusting of the air flow.

On the right side of the casing there is a bracket with the emergency stop button and the end switch.

OPERATING PRINCIPLE

Material is fed into the loading hopper, from where it enters the working space between the jaws. The upper smooth surface of the jaws is not involved in crushing. Middle surface is ribbed, which allows to increase the specific pressure on the particles of crushed material in the zone of preliminary crushing. The lower smooth lower surfaces of the jaws form a parallel zone — a zone of fine grinding, in which the product of the required particle size is obtained.

The complex movement of the jaw (primary horizontal vibrations in the upper part of the crushing zone and vertical vibrations in the lower part) provides a high degree of crushing.

The crushing product is collected in a receiving container located under the discharge zone.

PRODUCTION OPTIONS

  • Complete with loading hopper, receiving container and lining armor made of stainless steel (analogue to DIN 1.4541).
  • Complete with dust collector.
  • Complete with a feed-through funnel, a collecting bin (V=10 l) and a support stand.
  • Complete with tungsten carbide jaws.

SPECIAL OPTIONS:

  • Complete with explosion proof electric motor.
  • Complete with 1.5 kW electric motor.

Emergency stop button

Nozzle for connecting the dust collector

Loading hopper

JC 6M Jaw crusher and Cyclone dust collector with hood

MPU3-02 control panel

Loading scoops, V=1,2 L