The Control panels are designed for connecting AC induction motors to the supply circuit and for starting, protecting and shutting them off.
VIBROTECHNIK manufactures two types of control panel: MCP with a metal housing and PCP with a plastic housing.
The PCP control panel is designed for tabletop equipment in laboratories.
The MCP control panels are designed for large items operating under severe conditions. The MCP has modifications designed for control of process units consisting of several equipment items: the CMCP with two pushbutton posts.
|Compatible equipment models||DG 65||VCM 10, VG 1, VG 6, SG 1||VD 50, CDU||SM 50.0, VD 50, JC 6M, CDC, DG 175, DG 200, HC 2x2, JC 10M, DRC, DG 250, CM 250, JC 15||CDU with JC 6(M)
CDU with JC 10(M)
CDU with JC 15
CDU with DG 175M
CDU with DG 200M
CM 250 with CDC, HC 2x2 with CDC
| CM 120M with VF 1,
VD 50 with VF 1, CSU,
VD 50, CM 120M,
DG 175, DG 200,
DG 250, DRC, with VF 1/VF 2,
CDU with DG 175M/200M+VF1
|50 Hz supply voltage, V||220||380||220||380||220||380|
|Circuit breaker current, A||4||2-6,3||6-13||3-20||5-25||4-13||1-10|
|Thermal overload relay current, A||3,2||1,6-3,2||5-10||2,5-16||0,63-20||5-10||0,63-8,5|
|Overall dimensions (Length x Width x Height), mm||205х185х130||340х240х170|
Advantages of VIBROTECHNIK Control panels: