Ferroalloys, slag, coke, glass, soda, mineral fertilizers, granite, marble, cement, soil.
|Average product particle size, mm
|Minimum product particle size, mm
|Maximum initial material grain size, mm
|Loading volume of one cup, cm3
|Grinding time, min
|Mohs hardness of comminuted material, up to
|Number of cups
|50 Hz supply voltage, V
|Electric motor power, kW
|Vibration frequency, vibrations/minute
|Vibration amplitude, mm
|Overall dimensions (Length x Width x Height), mm
|Weight/weight with control panel, kg
|Grinding elements material – tool steel/zirconium dioxide/tungsten carbide
|105WCr6 or 90CrSi/ZrO2/tungsten carbide
|Grinding elements hardness – tool steel/zirconium dioxide/tungsten carbide
|58-62 HRC/ 1200-1250 HV/ 1180-1280 HV
|Compatible control panel
|PCP3-03 (with the timer)
* When using grinding elements made of zirconium dioxide or tungsten carbide
Cup fastener with adjustable latch. V-belt drive adjusting device
EFFECTIVE NOISE INSULATION
Soundproofing lining inside the cover provides a low noise level.
The end switch prevents the grinder from starting with cover open.
ORIGINAL DRIVE SYSTEM
The use of elastic lobe clutch reduces the vibration transmitted to the bearing surface.
SIMULTANEOUS GRINDING OF 6 SAMPLES
The simultaneous installation of 6 cups on the platform allows grinding up to 6 samples at a time.
QUALITY SPARE PARTS
The cup is made of tool steel (AISI 01, DIN 150Cr14, 9XC), zirconium dioxide ZrO2 or tungsten carbide WC. Ø 15 mm balls are used as grinding organs.
COMPATIBLE WITH CONTROL PANEL
The control panel is designed to start and stop the equipment and provides:
DESCRIPTION OF THE DEVICE
In VG 6 vibrating grinder comminution occurs due to abrasion — simultaneous compression and shear of the material. The product particle size depends on the hardness of the material and the comminution time.
A platform with a cup fastener and six cups assembled (a cup, a lid, 6 balls) is mounted on the platform through the springs. Rotation from the electric motor is transmitted through a belt drive to a drive shaft, which is mounted on a plate in the bearing assembly. From drive shaft the torque is transmitted through an elastic lobe clutch coupling to the debalance fixed on the axis of the platform.
The folding cover of VG 6 is designed to insulate the noise and to prevent access to the vibrating parts of the grinder.
VG 6 platform with the cups fixed on it performs circular oscillations in the horizontal plane. Due to this, balls make multidirectional movements inside the cups. The material is grinded between the walls of the cups and the balls.
VG 6 vibrating grinder
Elastic lobe clutch
Cups VG 6
Loading scoops, V=0,7 L