Sample splitter DP 20

INDUSTRIES

 Mining

 Metallurgical

 Construction

 Chemical

Pharmaceutical

 APPLICATIONS

Any dry bulk materials: ferroalloys, ores, granite, soil, sand, coal, glass.

Riffle width, mm

20

Maximum material feed size, mm *

6,5

Number of riffles

16

Sample collectors volume, L

3х6,3

Overall dimensions with 2 sample collectors, mm (Length x Width x Height), mm

522х403х403

Overall dimensions of 3rd sample collector, mm (Length x Width x Height), mm

328х257х249

Weight, kg

18,7

Material of splitting unit and sample collectors

08Х18Н10Т (AISI 304)

DIVISION ACCURACY

Sample division error does not exceed 2%.

NO CROSS-CONTAMINATION OF SAMPLES

The splitting unit and sample containers are made of 08X18H10T stainless steel (AISI 304).

COMPACTNESS

Small dimensions and weight.

EASY MAINTENANCE

The detachable design of DP 20 provides easy cleaning of residual material. The sample splitter is equipped with three sample collectors, each of them can be used as a loading scoop. That allows to repeat the division of the sample many times.

The structure of the sample splitter includes: a splitting unit, sidewalls, racks, three sample collectors.

The splitting unit is a package of plates forming riffles directed alternately to the sides. The block is covered by casing with loading funnel in the upper part.

Samplers are designed to collect a divided sample for uniform loading of the sample over the entire width of the loading funnel.

OPERATING PRINCIPLE

The sample splitter must be placed horizontally on a flat surface. Samplers should be inserted under the splitting unit until they stop. The sample is fed to a loading funnel. The material enters the splitting unit and is evenly distributed along the riffles to the sample collectors. Parts of the sample are transferred for further processing or re-division.

Splitter riffles

Sample collector

DP 20 sample splitter on T 70 stand