Maliy pr. V. O., 62/2, liter A, St. Petersburg, Russian Federation, 199178

Sieve Shaker S 50

INDUSTRIES

 Mining

 Metallurgical

Food

 Construction

 Chemical

Pharmaceutical

 APPLICATIONS

Diamonds, ferroalloys, ore, metal powders, coal, glass, ceramics, polymers, peat, cereals, coffee.

    
    

CHARACTERISTICS

PARAMETRES

VALUES

Sieve diameter, mm

500

Maximum number of sieves

8

Type of vibration drive

VD 50

Vibration frequency (vibrations / minute)

1500

Amplitude of oscillations (depending on the weight of the sample and the number of sieves), mm

2-4

50 Hz supply voltage, V

220 / 380

Length, mm

560

Width, mm

550

Height, mm

1100

Maximum weight, kg

101

ADVANTAGES

EFFECTIVE SIEVING

The vibration drive platform performs high-frequency reciprocating helical oscillations, which provides a spiral-shaped trajectory of particles along the sieving surface — from the center to the periphery of the sieve.

DIVISION INTO 9 CLASSES OF PARTICLE SIZE

Installation on a vibratory drive up to 8 screens allows dividing the sample into 9 classes of size.

LOW NOISE

Elastic drive elements and rubber shock absorbers provide a low noise level. The seal of the sieve fastener and the platform, as well as the sealing rings of the sieves exclude collisions of the sieves, provide a tight connection of the column of sieves and the convenience of its disassembly.

COMPATIBLE WITH CONTROL PANEL

The control panel is designed to start and stop the equipment and provides:

  • automatic power off when exceeding the maximum current value or short circuit;
  • protection of the operator from electric shock;
  • motor overload protection.

Control panel with a timer can be ordered.

HIGH SIEVING PERFORMANCE

The use of intermediate trays allows sieving up to five samples at a time. Intermediate rings are designed to increase the height of the sieve, which allows loading larger samples on the sieve.

DESCRIPTION OF THE DEVICE

The Sieve shaker includes: a vibration drive, a sieving part (consisting of a set of sieves complete with cover and tray) and a sieve fastener.

The setup of the vibration drive is described in the corresponding section of the «Vibration drives» page.

OPERATING PRINCIPLE

The material to be sieved is loaded onto the upper sieve, after which the set of sieves is fixed on the platform of the vibration drive using UKS. When turned on, vibration drive platform performs high-frequency reciprocating helical oscillations, which provides a spiral-shaped trajectory of particles along the sieving surface — from the center to the periphery of the sieve. Moreover, the path traveled by the particles significantly exceeds the diameter of the sieve, which increases the efficiency of sieving. The oscillation frequency is equal to the frequency of rotation of the electric motors, and the amplitude of the oscillations depends on quantity and weight of sieves with material.

Particles of material which are smaller than the size of the sells / apertures in the sieving surface of the upper sieve fall through on the next sieve, where the cycle repeats. As a result, the sample is distributed between the sieves and the tray in accordance with the fractional content. At the end of the sieving process, the contents of each sieve are weighed and the particle size distribution of the sample is determined.

Intermediate tray, intermediate ring, cover, tray, and shock-absorbing sealing ring

Loading scoops, V=1,2 L