Maliy pr. V. O., 62/2, liter A, St. Petersburg, Russian Federation, 199178

Sieve Shaker S 30 (on base VD 50)

INDUSTRIES

 Mining

 Metallurgical

Food

 Construction

 Chemical

Pharmaceutical

 APPLICATIONS

Diamonds, ferroalloys, ore, metal powders, coal, glass, ceramics, polymers, peat, cereals, coffee.

    
    

CHARACTERISTICS

PARAMETERS

VALUES

Inner frame diameter, mm

300

Maximum number of sieves

12

Mesh size, mm

0,04-10,0

Size of apertures in perforated plate, mm

0,8-150,0

Model of the vibration drive used

VD 50

Vibration frequency, vibrations / minute

1500

Amplitude of vibrations (depending on weight of sample and number of sieves), mm

0,5-1,5**

50 Hz supply voltage, V

220 / 380

Length (diameter), up to, mm

576

Width, up to, mm

-

Height, up to, mm

1155

Weight, up to, kg

87

**Depends on the weight of the elements installed on the platform and the weight of the sample

ADVANTAGES

EFFECTIVE SIEVING

The vibration drive platform performs high-frequency reciprocating helical oscillations, which provides a spiral-shaped trajectory of particles along the sieving surface — from the center to the periphery of the sieve.

DIVISION INTO 11 CLASSES OF PARTICLE SIZE

Installation on a vibratory drive up to 10 screens allows dividing the sample into 11 classes of size.

LOW NOISE

Elastic drive elements and rubber shock absorbers provide a low noise level. The seal of the sieve fastener and the platform, as well as the sealing rings of the sieves exclude collisions of the sieves, provide a tight connection of the column of sieves and the convenience of its disassembly.

COMPATIBLE WITH CONTROL PANEL

The control panel is designed to start and stop the equipment and provides:

  • automatic power off when exceeding the maximum current value or short circuit;
  • protection of the operator from electric shock;
  • motor overload protection.

Control panel with a timer can be ordered.

HIGH SIEVING PERFORMANCE

The use of intermediate trays allows sieving up to five samples at a time. Intermediate rings are designed to increase the height of the sieve, which allows loading larger samples on the sieve.

DESCRIPTION OF THE DEVICE

The Sieve shaker includes: a vibration drive, a sieving part (consisting of a set of sieves complete with cover and tray) and a sieve fastener.

The setup of the vibration drive is described in the corresponding section of the «Vibration drives» page.

OPERATING PRINCIPLE

The material to be sieved is loaded onto the upper sieve, after which the set of sieves is fixed on the platform of the vibration drive using UKS. When turned on, vibration drive platform performs high-frequency reciprocating helical oscillations, which provides a spiral-shaped trajectory of particles along the sieving surface — from the center to the periphery of the sieve. Moreover, the path traveled by the particles significantly exceeds the diameter of the sieve, which increases the efficiency of sieving. The oscillation frequency is equal to the frequency of rotation of the electric motors, and the amplitude of the oscillations depends on quantity and weight of sieves with material.

Particles of material which are smaller than the size of the sells / apertures in the sieving surface of the upper sieve fall through on the next sieve, where the cycle repeats. As a result, the sample is distributed between the sieves and the tray in accordance with the fractional content. At the end of the sieving process, the contents of each sieve are weighed and the particle size distribution of the sample is determined.

S 30 Sieve shaker on base VD 50 scheme

S 30 Sieve shaker on base VD 50 on T 40 stand

Loading scoops, V= 0,07 L and 1,2 L